Reverse Engineering Team
Unregistered, You must accept the Forum Rules below to be able to use some forum functions.

Read forum rules below...

1. All posts must be written in English.
2. Don't spam/abuse any other member via E-mail or Private Messages.
3. Have phun!

For breaking above rules you may be warned/banned appropriately!

Going from HASPHL2007 .dng file to x64 bit os

Page 5 of 7 Previous  1, 2, 3, 4, 5, 6, 7  Next

View previous topic View next topic Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by BfoX on Wed Jan 15, 2014 10:09 am

if you have the hardlock dongle (emulator) - simply redump it with the sporaw's dumper. link to reg/dat files put here

BfoX

Posts : 1008
Points : 1309
Reputation : 232
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by sasio22 on Wed Jan 15, 2014 11:29 am

Here are the .dat and .reg files.

drive.google.com/file/d/0B1xFpc1Yjum-dG9neXJCUlVsUHc/edit?usp=sharing

sasio22

Posts : 8
Points : 8
Reputation : 0
Join date : 2014-01-15

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by BfoX on Wed Jan 15, 2014 11:48 am

you have the RUS option inside

Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Multikey\Dumps\0000775C]
"hlkMemory"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,0F,DE,9F,26,03,00,00,08,00,00,16,00,A3,A7,\
00,00,00,00,00,00,02,0A,F8,07,00,05,F6,ED,FF,7F,\
01,00,AC,30,06,CB,00,00,00,00,00,00,9F,A1,71,FC
"Seed1"=dword:0000394B
"Seed2"=dword:000053D2
;"Seed3"=dword:0000A910
"Seed3"=dword:0000b801
"ID"=dword:00000000
"DongleType"=dword:00000002
"withMemory"=dword:00000001


Last edited by BfoX on Wed Jan 15, 2014 12:32 pm; edited 1 time in total

BfoX

Posts : 1008
Points : 1309
Reputation : 232
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by sasio22 on Wed Jan 15, 2014 12:10 pm

Not working on W7 x64.
I see only in System Device - Virtual USB Multikey

sasio22

Posts : 8
Points : 8
Reputation : 0
Join date : 2014-01-15

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by BfoX on Wed Jan 15, 2014 12:26 pm

sure, im wrong registry patch. not delete some part =)


Last edited by BfoX on Wed Jan 15, 2014 12:29 pm; edited 1 time in total

BfoX

Posts : 1008
Points : 1309
Reputation : 232
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Wed Jan 15, 2014 12:27 pm

Corrected reg path & seed3
hl775C:
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Multikey\Dumps\0000775C]
"HlkMemory"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,0F,DE,9F,26,03,00,00,08,00,00,16,00,A3,A7,\
00,00,00,00,00,00,02,0A,F8,07,00,05,F6,ED,FF,7F,\
01,00,AC,30,06,CB,00,00,00,00,00,00,9F,A1,71,FC
"Seed1"=dword:0000394B
"Seed2"=dword:000053D2
"Seed3"=dword:0000B801
"ID"=dword:00000000
"DongleType"=dword:00000002
"withMemory"=dword:00000001

hasp

Posts : 447
Points : 604
Reputation : 149
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by sasio22 on Wed Jan 15, 2014 12:48 pm

Hi, now seems to work OK, I can see in USB devices two Safenet Inc...
But if I enter to localhost:1947 I cant't see the key, and if I connect the original dongle nothing appears too.
In a Windows XP with dongle connected it appears on localhost:1947 but in my W7 x64 not.
What can I do?

Thanks for your help.

sasio22

Posts : 8
Points : 8
Reputation : 0
Join date : 2014-01-15

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by sasio22 on Thu Jan 16, 2014 6:28 am

Nobody has any idea?

sasio22

Posts : 8
Points : 8
Reputation : 0
Join date : 2014-01-15

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by kjms on Thu Jan 16, 2014 7:23 am

first to check software is working on win32 bit than try with 64bit

kjms

Posts : 189
Points : 245
Reputation : 47
Join date : 2010-09-12

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by sasio22 on Thu Jan 16, 2014 12:00 pm

Original dongle --> On Win XP 32 bit works OK, but on Win 7 x86 and x64 not working.
Multikey 18.1 --> On Win XP 32 bit works OK, but on Win 7 x86 and x64 not working.

On Win XP I can see the key in localhost:1947 but on Win 7 not.

sasio22

Posts : 8
Points : 8
Reputation : 0
Join date : 2014-01-15

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Thu Jan 16, 2014 12:14 pm

Ok the problem is software Idea  not emulator

hasp

Posts : 447
Points : 604
Reputation : 149
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by sasio22 on Thu Jan 16, 2014 12:20 pm

Yes, but why the key don't appear on localhost:1947 on W7?

sasio22

Posts : 8
Points : 8
Reputation : 0
Join date : 2014-01-15

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by BfoX on Thu Jan 16, 2014 12:42 pm

may be server not installed on W7

BfoX

Posts : 1008
Points : 1309
Reputation : 232
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by sasio22 on Thu Jan 16, 2014 1:14 pm

Hi, now all working OK.
On Win 7 key don't appear on localhost:1947 but the program is working perfect!
Thanks for all!

sasio22

Posts : 8
Points : 8
Reputation : 0
Join date : 2014-01-15

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by tonyM on Mon Mar 10, 2014 2:50 pm

Hi guys (Hasp),

I was using windows 32 bits with HASPHL2007 emulator, and now I´m upgrading system to Windows 7 64 bits, but I can´t use HASPHL2007 in last option.

I just uploaded .DNG file at www(dot)megafileupload(dot)com/en/file/507194/key-rar(dot)html

Can anyone help me with reg file to use with Multikey 0.18.0.3 for 64bit system?

Thanks in advance

tonyM

Posts : 3
Points : 3
Reputation : 0
Join date : 2014-03-10

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by kjms on Tue Mar 11, 2014 12:33 am

tonyM
post the dongle password 1&2

kjms

Posts : 189
Points : 245
Reputation : 47
Join date : 2010-09-12

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by tonyM on Tue Mar 11, 2014 4:49 am

These strings are seen in the HASPHL2007->Dumper->HASP/HL Dongles window:
0000:661E
2FBD:3BBB

These are the first two rows from Toro monitor log:
Hasp In:> HaspInitPacket
PW1=12221 (0x2FBD) , PW1=15291 (0x3BBB)

Thanks!

tonyM

Posts : 3
Points : 3
Reputation : 0
Join date : 2014-03-10

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by kjms on Tue Mar 11, 2014 5:26 am

Hmm its hardlock dongle
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\0000661E]
"Name"="Dump for 661Eh (26142) dongle"
"Copyright"="kjms"
"Created"="11.03.2014 15:52:37"
"DongleType"=dword:00000002
"ID"=dword:00000000
"withMemory"=dword:00000001
"Seed1"=dword:000078C9
"Seed2"=dword:0000AB4C
"Seed3"=dword:0000E856
"HlkMemory"=hex:\
30,30,30,30,30,00,00,00,00,00,00,00,31,53,50,56,\
20,28,44,45,4D,4F,29,00,00,00,00,00,48,72,2E,20,\
4B,61,6C,74,68,6F,66,66,00,00,00,00,52,4F,4D,45,\
53,32,00,00,00,00,00,00,00,00,00,00,14,00,00,00,\
31,31,2D,39,30,30,35,32,38,38,2D,30,31,30,30,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

kjms

Posts : 189
Points : 245
Reputation : 47
Join date : 2010-09-12

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by tonyM on Tue Mar 11, 2014 6:31 am

Thank you kjms,
but the program still isn't working in Windows7-x64-  keeps saying "No dongle found".

After merging REG file into the registry, and restarting Multikey (0.18.0.3), two new USB devices appeared: SafeNet Inc. Hardlock key and SafeNet Inc. USB key.
Windows7-x64 is in TestMode, several OS restarts done- no solution.

I also checked same REG file with WindowsXP-x32 and Multikey 0.18.0.3: two new USB devices appeared (SafeNet Inc. Hardlock key and SafeNet Inc. USB key) and the program is working.

Could you provide other REG/solution for Windows7-x64?

Best regards,
tonyM


Last edited by tonyM on Sun Mar 16, 2014 6:33 pm; edited 2 times in total

tonyM

Posts : 3
Points : 3
Reputation : 0
Join date : 2014-03-10

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by ianlcc on Sun Mar 16, 2014 11:51 am

HI, sir
Now my computer OS all change to windows 7 64bit or windows 8 64bit.
So I try to find the method and step by step to emulate HASP HL dongle my self.

I had success got the Hasp HL's reg file.
And I try install VUsbBus in the WIN XP and it's success.
But I follw some step and install in the WIN 7 64bit, it's not success.

I really don’t know where I do wrong , and I had go to Control-device to check the device is success for work.
I don't know what happened in my step, please help me .


where I do wrong please.
[step1] Install the Hasp 5.9.5 Drivers.
[step2] Merge XXX.reg with the registry,just double click on the file and it will ask if you want to add, click yes. 
[step3] Run Driver Signature Enforcement Overrider 1.3b Tool.
Select "enable test mode" -> next -> ok
Select "sign a system file" -> next -> location of multikey 18.1 example : "c:\Multikey_x64\multikey.sys"(if I put the Multikey_x64 folder at the C
:\
And restart my computer , and it is show TEST MODEL in the desktop.
(I have not select “unable test mode” before I reboot computer)
[step4] Now go to MultiKey_x64 folder(I had copy in the C, Click Rigth botton "install.cmd" -> run administrator -> wait install hardware
, and It said that "driver was successfully installed" message.
[Step5] I restart my computer and press F8 into the system , I go to Control-device to check the device is success for work , but when I try to run the Software , it’s show can’t find the dongle.
What’s happen@@
[note] I had try to emulator in the XP os , it’s show success and can run the software.
Sir please help me or teach where I do wrong of my step please.
And I will appreciate and thank you a lot.

ianlcc

Posts : 15
Points : 23
Reputation : 0
Join date : 2013-10-30

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by nodongle on Mon Mar 17, 2014 7:26 am

as my knowledge you need to update *.cat file of multikey

nodongle

Posts : 52
Points : 54
Reputation : 0
Join date : 2011-11-28

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by ianlcc on Mon Mar 17, 2014 9:57 am

nodongle wrote:as my knowledge you need to update *.cat file of multikey
Hi,sir
can you help me to update *.cat file of multikey?
please.

ianlcc

Posts : 15
Points : 23
Reputation : 0
Join date : 2013-10-30

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by ianlcc on Wed Mar 19, 2014 6:47 pm

Hi, sir
I try to emulate by my reg at win7, then still can't work.
please help check my reg file right or not and give some help or suggestion to me.
 
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\NEWHASP\Services\Emulator\HASP\Dump\09C7652E]
"Name"=""
"Copyright"="Copyright (C) 2013 user"
"Created"="09/10/2013 19:04:31"
"SN"=dword:14D2BCF8
"Type"=dword:0000000A
"Memory"=dword:00000004
"SecTable"=hex:66,C9,26,89,66,C9,26,89
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,09,09,0D,01,0B,04,27,00
"Data"=hex:\
20,4E,2E,4B,2E,55,2E,41,2E,53,2E,20,2D,20,20,54,\
41,49,57,41,4E,20,20,2A,20,20,20,20,20,20,31,31,\
31,31,32,30,37,31,38,37,34,33,20,20,20,20,20,30,\
00,00,FF,FF,00,00,FF,FF,00,00,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
"EDStruct"=hex:\
DF,07,CC,55,33,AA,00,BC,12,FE,50,B8,16,FA,54,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColumnMask"=dword:000000FB
"CryptInitVect"=dword:00000013

ianlcc

Posts : 15
Points : 23
Reputation : 0
Join date : 2013-10-30

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Wed Mar 19, 2014 9:48 pm

use mk18+
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\09C7652E]
"Name"=""
"Copyright"="Copyright (C) 2013 user"
"Created"="09/10/2013 19:04:31"
"SN"=dword:14D2BCF8
"Type"=dword:000000EA
"Memory"=dword:00000020
"DongleType"=dword:00000001
"SecTable"=hex:66,C9,26,89,66,C9,26,89
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,09,09,0D,01,0B,04,27,00
"Data"=hex:\
20,4E,2E,4B,2E,55,2E,41,2E,53,2E,20,2D,20,20,54,\
41,49,57,41,4E,20,20,2A,20,20,20,20,20,20,31,31,\
31,31,32,30,37,31,38,37,34,33,20,20,20,20,20,30,\
00,00,FF,FF,00,00,FF,FF,00,00,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF

hasp

Posts : 447
Points : 604
Reputation : 149
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by ianlcc on Thu Mar 20, 2014 12:13 am

hasp wrote:thank you a lot

use mk18+
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\09C7652E]
"Name"=""
"Copyright"="Copyright (C) 2013 user"
"Created"="09/10/2013 19:04:31"
"SN"=dword:14D2BCF8
"Type"=dword:000000EA
"Memory"=dword:00000020
"DongleType"=dword:00000001
"SecTable"=hex:66,C9,26,89,66,C9,26,89
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,09,09,0D,01,0B,04,27,00
"Data"=hex:\
20,4E,2E,4B,2E,55,2E,41,2E,53,2E,20,2D,20,20,54,\
41,49,57,41,4E,20,20,2A,20,20,20,20,20,20,31,31,\
31,31,32,30,37,31,38,37,34,33,20,20,20,20,20,30,\
00,00,FF,FF,00,00,FF,FF,00,00,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF

ianlcc

Posts : 15
Points : 23
Reputation : 0
Join date : 2013-10-30

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by Sponsored content


Sponsored content


Back to top Go down

Page 5 of 7 Previous  1, 2, 3, 4, 5, 6, 7  Next

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum