Reverse Engineering Team
Unregistered, You must accept the Forum Rules below to be able to use some forum functions.

Read forum rules below...

1. All posts must be written in English.
2. Don't spam/abuse any other member via E-mail or Private Messages.
3. Have phun!

For breaking above rules you may be warned/banned appropriately!

Going from HASPHL2007 .dng file to x64 bit os

Page 2 of 7 Previous  1, 2, 3, 4, 5, 6, 7  Next

View previous topic View next topic Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp4_75 on Mon Jan 28, 2013 4:52 pm

if you see Virtual USB Multikey in System Device with no yellow warning, it's ok for multikey. the emulation is ready
if you don't have "usbkey" in usb composite device:
- you don't insert the reg file
- you don't install the driver of the key

hasp4_75

Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by there on Tue Jan 29, 2013 10:09 am

to: hask4_75 , you are the same person how user hasp, who has me create the *.reg file? If yes, I really happy for helping me. Thank you very much.

1) I added the *.reg to my registry, but I have not control it with regedit. Windows show me the sucesfull message box about it and I belive him. I would like test it, but it is not possible. Win8 64bit is on my desktop at home and I will be out of home for few weeks. Because it´s look like it is not problem with emulator but *.reg or drivers I will test it on my notebook with Win7 32bit tomorow.

2) I have been use HASPUserSetup.exe from 2010 drivers 64bit ( Sentinel Hasp Run time setup )

I will test the newest drivers. But may be I give you the bad password.

I have only this numbers from HASPHL2007, and I really don´t know which of these two Strings is the passwords.

Licence Dongles:6FB20803

HASP/HL 56A530B2


Last edited by there on Tue Jan 29, 2013 10:16 am; edited 2 times in total (Reason for editing : correction)

there

Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Tue Jan 29, 2013 11:57 am

dongle id = 56A530B2
dongle serial no = 6FB20803

hasp

Posts : 436
Points : 591
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by there on Wed Jan 30, 2013 8:36 am

I have been tested on my Win7 32bit. It doesn´t work.

1) I have installed multikey DriverVer=12/31/2009, 0.18.2.3

- I see them in system devices - as Virtual USB Multikey

2) Then I install the Alladin driver

HASP Device Driver version 5.22

3) I have been add the *.reg to registry. I start regedit and I have see there.

In Device manager - Universal Serial USB controler - I don´t see the hardlock.



I thing the problem is in wrong password. I give you bad password. Where can I fing the correct password?


Last edited by there on Wed Jan 30, 2013 9:54 am; edited 1 time in total (Reason for editing : correction)

there

Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by there on Thu Jan 31, 2013 1:28 am

I was looking to the page : dongleduplicate.nsys.by/passwfind.htm

and I see the way to find password. So I must give you the correct pass.

Somebody where is the problem?

there

Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Thu Jan 31, 2013 9:45 am

post your installer setup file here

hasp

Posts : 436
Points : 591
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by there on Thu Jan 31, 2013 10:42 am

hasp wrote:post your installer setup file here

If you mean file which install the drivers (hdd32.exe). Here it is.

http(://)depositfiles.com/files/7ckt8c2ft


Last edited by there on Thu Jan 31, 2013 10:42 am; edited 1 time in total (Reason for editing : corection)

there

Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Thu Jan 31, 2013 12:12 pm

not driver file, what i say program installer setup file..


Last edited by hasp on Mon Feb 04, 2013 10:44 am; edited 1 time in total

hasp

Posts : 436
Points : 591
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by there on Fri Feb 01, 2013 10:26 am

hasp wrote:not driver file, what i saw program installer setup file..

I am sorry, it is not possible. The developers of this programs are my friends and I will not share the program to the net.

there

Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Fri Feb 01, 2013 10:34 am

than try your self What a Face

hasp

Posts : 436
Points : 591
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp4_75 on Fri Feb 01, 2013 3:54 pm

Hi,

I have somewhat the same problem as "there."
I used a software on XP32bits with HASPEmulPE-XP_2_33_a002W.EXE and a Reg file.
Everything was ok.

I created a dump in XP32bits.
I created a reg file compatible with multikey with DUMP2REG
I installed multikey32 18.0.3 and this REG under XP32 and the software works.
I installed multikey64 18.0.3 and this REG under Seven64 and it does not work.

What I did under Seven64:

1 - I cut UAC
2 - With DESEO13B, I go into test mode.
3 - I have "Test Mode Windows 7 number 7601" in the lower right
4 - I run the REG file
5 - I installed 18.0.3 64-bit Multikey
6 - I install the Hasp driver
6 - I have the device "USB Virtual Multikey" in the peripheral system, which is ok
7 - I have devices "Aladdin USB Key" and "Aladdin HASP Key" in the Universal Serial Bus controllers, which are ok.
The software does not see the key.

Any idea? Any help?

Thanks a lot.

hasp4_75

Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by BfoX on Sat Feb 02, 2013 3:01 am

here is NO magic people's. put here your MK reg/dump files

BfoX

Posts : 857
Points : 1113
Reputation : 202
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by there on Sat Feb 02, 2013 9:18 am

hasp wrote:than try your self What a Face

bounce I will, for me it is not a problem. I thing the problem is in *.reg file becase I can´t see the Alladin USB dongle in device manager. It´s possible the say me how have you create it?



2 hasp4_75 : maybe, it´s look like it must be two different *.reg files ( one for 32bit, second fo 64bit)

there

Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp4_75 on Mon Feb 04, 2013 10:14 am

Hi,

Here all the files:
hoop depositfiles.com_files_uc89wqwfn


Thanks.

Rudy.

hasp4_75

Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Mon Feb 04, 2013 10:58 am

XP32 with multikey - NOK under Seven64.reg this reg perfect for 32 & 64 bit...
soft run always F8 sign drive mode...

hasp

Posts : 436
Points : 591
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp4_75 on Mon Feb 04, 2013 11:27 am

There is no difference if I select
disable the control driver signing by F8 or not
Why am I forced to do that?
I'm always in Test Mode.
Where can I find THE good Seven64 driver for this key?

hasp4_75

Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by priviett on Mon Feb 11, 2013 1:11 am

Hello.

I have a software called CPC Caption Maker, i have been using this software with the Hasp\Hardlock Emulator 2007 for almost 4 years, i have an .dng file, not the dump, because i only have this file, i have no access to the physical dongle anymore, but now i need to use this in win 7 and 8 x64.

Can you please help me?

I have multikey already installing and running, it appears on the device manager, so far no problem.

Im attaching the .dng.

I supose that the pass is the one that appears on the dumper window in the Hasp\Hardlock Emulator 2007

7EF5:1F0C

The serial is: 469422BC

w w w .mediafire.com/?plrtegq2gwzqd2
Thank you so much.

priviett

Posts : 3
Points : 3
Reputation : 0
Join date : 2013-02-10

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by kjms on Mon Feb 11, 2013 5:16 am

Priviett
check the link is wrong

kjms

Posts : 182
Points : 234
Reputation : 45
Join date : 2010-09-12

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by priviett on Mon Feb 11, 2013 12:03 pm

Im sorry
it was to late last night and i was very tired.
w w w .mediafire.com/?plrtegq2gwzqd25

priviett

Posts : 3
Points : 3
Reputation : 0
Join date : 2013-02-10

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Mon Feb 11, 2013 12:25 pm

use multikey 18.0.3 for 64bit
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\7EF51F0C]
"Copyright"="hasp"
"Name"="For priviett"
"DongleType"=Dword:00000001
"Created"="11/02/2013 23:50:53"
"SN"=dword:469422BC
"Type"=dword:0000000A
"Memory"=dword:00000001
"SecTable"=hex:6E,2C,FE,BC,42,00,D2,90
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,0B,01,0D,01,10,15,12,00
"Data"=hex:\
25,00,03,05,0A,00,00,00,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF

hasp

Posts : 436
Points : 591
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by there on Fri Feb 15, 2013 5:01 am

2 priviett :
Does it work?

there

Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by clawhammer on Sat Feb 23, 2013 4:42 pm

Hello! I have the same issue on x64.
My HASP successfully was emulated on x32 with HASPHL2007, and DNG created from Haspedge (HASP tab).

I don't understand - is the key SRM (i can connect by 1947 web GUI) or HL?
[You must be registered and logged in to see this image.]

I have an DNG but can't share it due to site restrictions for 7 days Crying or Very sad

Password : 5E1B:276B

Is it possible to run it on x64?

clawhammer

Posts : 11
Points : 15
Reputation : 0
Join date : 2013-02-23

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by BfoX on Sun Feb 24, 2013 2:15 am

you can upload it at any share and post here your link

BfoX

Posts : 857
Points : 1113
Reputation : 202
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by clawhammer on Sun Feb 24, 2013 12:59 pm

There is an option on this site - newborns cant post links for 7 days.
But i try: ow.ly / hZXen

clawhammer

Posts : 11
Points : 15
Reputation : 0
Join date : 2013-02-23

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by hasp on Sun Feb 24, 2013 1:41 pm

your hasp password is wrong. you don't have pass than upload your hasphl2007 XXXX.dmp file

hasp

Posts : 436
Points : 591
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: Going from HASPHL2007 .dng file to x64 bit os

Post by Sponsored content Today at 5:53 am


Sponsored content


Back to top Go down

Page 2 of 7 Previous  1, 2, 3, 4, 5, 6, 7  Next

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum