Reverse Engineering Team
Unregistered, You must accept the Forum Rules below to be able to use some forum functions.

Read forum rules below...

1. All posts must be written in English.
2. Don't spam/abuse any other member via E-mail or Private Messages.
3. Have phun!

For breaking above rules you may be warned/banned appropriately!

HASP HL Pro (Purple)

Page 1 of 2 1, 2  Next

View previous topic View next topic Go down

HASP HL Pro (Purple)

Post by cmgpereira on Wed Oct 31, 2012 6:19 pm

Hi there!

I have been trying to emulate an HASP HL 3.25 dongle however not succeded until now. So far I was not even capable of getting the hasp passwords....can anyone help me?

With UVCView I've got the following information:

---===>Device Information<===---
English product name: "HASP HL 3.25"

ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: Low
Device Address: 0x01
Open Pipes: 0
*!*ERROR: No open pipes!

===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0xFF -> This is a Vendor Specific Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 = (Cool Bytes
idVendor: 0x0529idProduct: 0x0001
bcdDevice: 0x0325
iManufacturer: 0x01
English (United States) "AKS"
iProduct: 0x02
English (United States) "HASP HL 3.25"
iSerialNumber: 0x00
bNumConfigurations: 0x01

===>Configuration Descriptor<===
bLength: 0x09
bDescriptorType: 0x02
wTotalLength: 0x0014
*!*ERROR: Invalid total configuration size 0x14, should be 0x12
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 -> Bus Powered
MaxPower: 0x19 = 50 mA

===>Interface Descriptor<===
bLength: 0x09
bDescriptorType: 0x04
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x00
bInterfaceClass: 0xFF -> Vendor Specific Device
bInterfaceSubClass: 0x00
*!*CAUTION: This appears to be an invalid bInterfaceSubClass
bInterfaceProtocol: 0x00
iInterface: 0x00
*!*ERROR: 0xFF is the prerelease USB Video Class ID


Thanks.

cmgpereira

Posts : 8
Points : 12
Reputation : 0
Join date : 2012-10-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by BfoX on Thu Nov 01, 2012 9:46 am

hasp srm may be?

BfoX

Posts : 931
Points : 1220
Reputation : 229
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: HASP HL Pro (Purple)

Post by cmgpereira on Thu Nov 01, 2012 6:40 pm

Well...I don't know. How can I check that?

However now I was able to get the passwords - 0x10A3 and 0x1EC4 - using HASPHL2007 (with HASPHL2010 didn't worked).
According to what I have read, I tried to dump the dongle and for that I have used H4dmpbs but even the dump says succeded I got only 10A31EC4.dmp file. Shoudn't I get another one?

Now I was trying to convert the dump to .reg however I was not able to find the uni to reg converter.

I really appreciate all the help! Thanks!

cmgpereira

Posts : 8
Points : 12
Reputation : 0
Join date : 2012-10-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by BfoX on Thu Nov 01, 2012 9:39 pm

show it

BfoX

Posts : 931
Points : 1220
Reputation : 229
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: HASP HL Pro (Purple)

Post by cmgpereira on Fri Nov 02, 2012 2:44 pm

Pass1 0x10A3
Pass2 0x1EC4

www31.zippyshare.com/v/79624431/file.html

cmgpereira

Posts : 8
Points : 12
Reputation : 0
Join date : 2012-10-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by hasp on Fri Nov 02, 2012 9:36 pm

save as reg use multikey 18.2.4 for 32bit, for 64bit use 18.0.3mkey.
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\10A31EC4]
"Copyright"="hasp"
"SN"=dword:02099B42
"Type"=dword:0000000A
"Name"="For cmgpereira"
"Memory"=dword:00000001
"DongleType"=dword:00000001
"Created"="03/11/2012 07:01:19"
"SecTable"=hex:0D,D4,58,D0,E1,F0,F0,F0
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,54,24,00,00,00,00,00,00,00,00,C9
"Data"=hex:\
54,41,43,4B,45,20,20,20,20,20,20,20,20,20,20,20,\
64,61,20,43,6F,73,74,61,20,54,65,69,78,65,69,72,\
61,20,20,20,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF

hasp

Posts : 444
Points : 599
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: HASP HL Pro (Purple)

Post by cmgpereira on Sun Nov 04, 2012 6:46 pm

It seems to be working with a strange and small issue. Sometimes when I start the application windows restarts with an error (black screen with one line error message) and I am not able to read the message...however after a new boot works normally. This is very rare to happens (for what I have tested so far)...

I searched for multikey 18.2.4 but I was only able to find 18.2.3...could that be the cause? This had never happened me before using the dongle.

Anyway I really have to thank you for the great help! Thanks!

cmgpereira

Posts : 8
Points : 12
Reputation : 0
Join date : 2012-10-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by cmgpereira on Mon Dec 10, 2012 6:14 pm

Well...after a while I found what was the problem.

I was trying to use this emulator on a virtual machine. Apparently on VirtualBox it doesn't work 100% (sometimes yes but ocasionally it crashes with blue screen). After testing on VMWare no problem at all. According to what I've read may be related with some drivers emulation on the virtual machine emulator.

Hope this information may be useful for others...

Finally, hasp can I ask you how did you generate the .reg file with the information I sent you? THanks again!

cmgpereira

Posts : 8
Points : 12
Reputation : 0
Join date : 2012-10-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by vaishali_k86 on Mon Dec 31, 2012 5:57 am

Thanks all for your valuable advice.


Last edited by vaishali_k86 on Wed Jan 16, 2013 3:49 pm; edited 1 time in total

vaishali_k86

Posts : 6
Points : 6
Reputation : 0
Join date : 2012-12-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by hasp on Mon Dec 31, 2012 7:45 am

@vaishali_k86
dump with this dumber (http://lostdongle.com/bin/HaspHLDumper1.01.rar) post the bin file link here after....

hasp

Posts : 444
Points : 599
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: HASP HL Pro (Purple)

Post by vaishali_k86 on Mon Dec 31, 2012 8:20 am

Thanks all for your valuable advice.


Last edited by vaishali_k86 on Wed Jan 16, 2013 3:49 pm; edited 1 time in total

vaishali_k86

Posts : 6
Points : 6
Reputation : 0
Join date : 2012-12-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by hasp on Mon Dec 31, 2012 8:49 am

wait a week to follow the admin rules... bounce


Last edited by hasp on Thu Jan 03, 2013 11:10 am; edited 1 time in total

hasp

Posts : 444
Points : 599
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: HASP HL Pro (Purple)

Post by vaishali_k86 on Mon Dec 31, 2012 9:12 am

Ok hasp. In the mean time any tips so that I can try to work around the problem myself.

vaishali_k86

Posts : 6
Points : 6
Reputation : 0
Join date : 2012-12-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by hasp on Thu Jan 03, 2013 11:08 am

if your dongle hasp hl need to extracted QA tables from your .exe , .dll file & hasp log file.

hasp

Posts : 444
Points : 599
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: HASP HL Pro (Purple)

Post by vaishali_k86 on Fri Jan 04, 2013 1:04 pm

Thanks all for your valuable advice.


Last edited by vaishali_k86 on Wed Jan 16, 2013 3:50 pm; edited 1 time in total

vaishali_k86

Posts : 6
Points : 6
Reputation : 0
Join date : 2012-12-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by vaishali_k86 on Tue Jan 08, 2013 10:50 am

Thanks all for your valuable advice.


Last edited by vaishali_k86 on Wed Jan 16, 2013 3:50 pm; edited 1 time in total

vaishali_k86

Posts : 6
Points : 6
Reputation : 0
Join date : 2012-12-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by lashboys on Tue Jan 08, 2013 10:23 pm

vaishali_k86 Dump and log is not enough for hasp hl wirh .protect envelope.
You need to extract pair table from .protect section with hand our tools

lashboys

Posts : 1
Points : 5
Reputation : 3
Join date : 2012-04-08

Back to top Go down

Re: HASP HL Pro (Purple)

Post by cmgpereira on Tue Feb 12, 2013 9:04 am

Hi,

I am trying to emulate another dongle but I don't know how to create the reg for multikey use...

I already have the dump file but now I am stucked...I will upload the dump (Pass1: 2B2B Pass2: 6F4D)

[You must be registered and logged in to see this link.]


Thanks.

cmgpereira

Posts : 8
Points : 12
Reputation : 0
Join date : 2012-10-31

Back to top Go down

Re: HASP HL Pro (Purple)

Post by hasp on Tue Feb 12, 2013 9:27 am

save as reg use multikey 18.2.4 for 32bit, for 64bit use 18.0.3mkey.
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\2B2B6F4D]
"Copyright"="hasp" 
"Name"="For cmgpereira"
"DongleType"=Dword:00000001     
"Created"="12/02/2013 20:53:56"
"SN"=dword:34BC2E44
"Type"=dword:0000000A
"Memory"=dword:00000001
"SecTable"=hex:07,74,0B,78,87,F4,8B,F8
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,54,24,00,00,00,00,00,00,00,00,C9
"Data"=hex:\
57,49,4E,44,4D,41,4E,20,31,31,31,31,30,30,38,32,\
DD,07,42,B4,3C,3C,90,78,66,6E,3A,CA,C6,E4,C0,C6,\
66,2A,E6,69,15,C9,5F,8A,52,9E,9E,6A,7E,7A,52,20,\
72,E2,AC,72,1C,98,34,1A,63,4C,5E,9C,CA,24,A8,B8,\
D8,58,7C,F8,1E,12,1E,1A,30,20,80,B0,7E,26,0E,14,\
AA,90,A8,C4,28,D2,80,00,F6,48,90,90,9E,18,7E,F6,\
46,6A,CE,B8,CA,74,B8,FE,C8,FA,04,28,52,42,4C,F0

hasp

Posts : 444
Points : 599
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: HASP HL Pro (Purple)

Post by Slayer on Wed Dec 11, 2013 9:05 am

I have u dump purple hasp

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

2885:50B5

Thanks for help

Slayer

Posts : 2
Points : 2
Reputation : 0
Join date : 2013-09-25

Back to top Go down

Re: HASP HL Pro (Purple)

Post by hasp on Wed Dec 11, 2013 10:19 pm

save as reg use multikey 18.2.4 for 32bit, for 64bit use 18.0.3mkey.
288550B5:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\288550B5]
"Copyright"="hasp"  
"Name"=" To Slayer"
"DongleType"=Dword:00000001
"Created"="12/12/2013 06:45:58"
"SN"=dword:32A8F783
"Type"=dword:000000EA
"Memory"=dword:00000001
"SecTable"=hex:44,37,88,BB,AE,BF,AA,BB
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,0C,0B,0D,01,02,10,07,00
"Data"=hex:\
24,47,42,20,53,54,41,4D,42,4F,4C,49,4A,41,2C,20,\
5A,72,65,6E,6A,61,6E,69,6E,2C,20,32,37,2E,30,34,\
2E,32,30,31,32,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
3F,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,\
20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,\
20,20,20,20,20,20,20,20,20,20,20,20,20,20,6B,20,\
20,20,20,20,20,20,20,20,41,20,20,20,20,42,54,8E,\
57,42,50,54,01,00,00,00,10,00,00,00,00,00,28,B1,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColumnMask"=dword:0000009B
"CryptInitVect"=dword:00000010

hasp

Posts : 444
Points : 599
Reputation : 147
Join date : 2011-12-16

Back to top Go down

Re: HASP HL Pro (Purple)

Post by Slayer on Thu Dec 12, 2013 8:58 am

I'm use this key , but is not working...

[You must be registered and logged in to see this link.]

And i have dump file ... i need dump file to dng

dump - [You must be registered and logged in to see this link.]

---------------------------------------------------------

Ok, key working for me....dongle is working !

Thanks

Slayer

Posts : 2
Points : 2
Reputation : 0
Join date : 2013-09-25

Back to top Go down

Re: HASP HL Pro (Purple)

Post by teomondo on Thu Dec 19, 2013 7:52 pm

Dear Sirs
I am not able to log from Hasp HL PRO (purple key) to get Pass. Tried with Toro and Sataron with no luck.
Any suggestion is welcome.
Thaks and Regards
Teo

teomondo

Posts : 6
Points : 6
Reputation : 0
Join date : 2013-12-18

Back to top Go down

Re: HASP HL Pro (Purple)

Post by BfoX on Fri Dec 20, 2013 1:21 am

hasp srm

BfoX

Posts : 931
Points : 1220
Reputation : 229
Join date : 2012-04-18
Location : Earth

Back to top Go down

Re: HASP HL Pro (Purple)

Post by teomondo on Fri Dec 20, 2013 11:09 am

Dear Bfox
Used SRM-DUMPER and generated 3 files.
EA_59135.dmp
ro_mem.bin
rw_mem.bin
How to get file.reg for Multikey Emulator if possible?
What suggest me to do next?
Thanks a lot and Regards
Teo

teomondo

Posts : 6
Points : 6
Reputation : 0
Join date : 2013-12-18

Back to top Go down

Re: HASP HL Pro (Purple)

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 2 1, 2  Next

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum