Reverse Engineering Team
Unregistered, You must accept the Forum Rules below to be able to use some forum functions.

Read forum rules below...

1. All posts must be written in English.
2. Don't spam/abuse any other member via E-mail or Private Messages.
3. Have phun!

For breaking above rules you may be warned/banned appropriately!

Hasp4 EDStruct unterstanding

View previous topic View next topic Go down

Hasp4 EDStruct unterstanding

Post by shrek2 on Sun May 19, 2013 7:57 am

I've succesfully dumped an hasp4 dongle, I converted the .dmp --> .reg file and found the data and EDStruct sections.

How can I unterstand how those sections are accessed by the .exe program using the dongle? And mainly which blocks are read?

Dunno if this is the right procedure but I merged the .reg file to windows registry, then run the program and used Hasp Emulator pro 2.33 a002w , it seems working perfectly, but the only accesses the prog seems to do to the Dongle are "dongle ID" and "Dongle status" (respectively 05 and 06).


shrek2

Posts : 2
Points : 4
Reputation : 0
Join date : 2013-05-18

Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum