HASPHL in 64 bit

I need help with emulating in 64 bit. I have dumped with h5dmp, converted to reg with unidmp, edited the reg file to work with multikey, used multikey 18.2.2 in 32 bit, and MK_18_2_4 x64_WIN7 in 64 bit. Emulation installs in safe mode for 32 bit and everything seems to run fine. However in 64 bit I used various versions of devcon and downloaded the windows driver kit for other versions of devcon. The driver signature was disabled and my windows desktop reads "test mode;windows 7, build7601." I was able to install using devcon in safe mode for 64 bit. However the program will not work in safe mode to regular boot up. In device manager SafeNet Inc. Sentinel HL Key had an exclamation mark, but I re-installed the driver and windows says device is working properly. Would I need to edit the reg file for 64 bit or would the same one that was made in 64 bit work. Any advice would be greatly appreciated. Thanks

@needhasp

Maybe your reg is not good, upload the dmp here and someone can help you.

Thanks for your help. Below is the link with my files. Included is the dmp(made in 32 bit system), reg file edited for multikey, and memory file. Again any advice on where I went wrong is appreciated. This the first time I have used rapid share, please let me know if there are any problems with the link

[You must be registered and logged in to see this link.]

Here is the link for the files. Please remove the quotes on both ends and paste. Included is the dmp files, reg file edited for multikey, and the memory file.
Please let me know if you have any problems with the link


Thanks for any assistance

"https://rapidshare.com/files/3934361242/hasp.zip"

needhasp wrote:I need help with emulating in 64 bit. I have dumped with h5dmp, converted to reg with unidmp, edited the reg file to work with multikey, used multikey 18.2.2 in 32 bit, and MK_18_2_4 x64_WIN7 in 64 bit.

@needhasp MK_18_2_4 x64_WIN7 in 64 bit you need license to pay for elite,You could try 18.0.3 64bit it free version link here. rar pass= ruboard

Thanks for the download link. I ran the driver signature over ride program and installed multikey 18.0.3 in safemode without devcon failed. However in device manager it says window cannot not verify driver signature. In safe mode the top of the screen says "Microsoft (R) Windows (R) Build 7601: Service Pack 1" I copied the .sys file into system32 driver folder. Any advice is appreciated on how to get past this driver signature.

Hi Im new to here

also need to say i have only little knowledge in the emulation

but i found Digitally Signed - Test Certificate Multikey version

& i got succeed with it in 64 bit i couldn't post the uploaded link to you because i just registered

search the web for Digitally Signed - Test Certificate Multikey V1.8.10 - 32 Bit & 64 Bit

may you will success

As ennabu said link Here Pass for download link: christmas
rar pass: something-for-christmas

Thanks for the link. Everything seems to be working fine. This was a great forum that has taught me a great deal. One of the things that takes a while to find all the tools. Below is a link of all the tools I have compiled since I started researching on how to backup this key. Hopefully this helps those who are new. Some of the tools may not be useful. The file is 92.16 MB

"https://rapidshare.com/files/178831716/Dongle_emulation.zip"

message removed