Reverse Engineering Team
Unregistered, You must accept the Forum Rules below to be able to use some forum functions.

Read forum rules below...

1. All posts must be written in English.
2. Don't spam/abuse any other member via E-mail or Private Messages.
3. Have phun!

For breaking above rules you may be warned/banned appropriately!

multikey 18.0.3 HASP HL not work with I7 processors

View previous topic View next topic Go down

multikey 18.0.3 HASP HL not work with I7 processors

Post by manta2005 on Sat Nov 08, 2014 1:09 pm

Hi All,

First sorry for my not good english.

I have problem with my new laptop.

All story:

I have two dongles one hardlock and one HASP HL.

They work well on my old laptop HP 8730W intel T9400 processor. 

Now i have new laptop Dell M4800 - Intel I7-4900 processor.

I install Windows 7 SP1 x64 (same like HP one) install multikey aladin drivers 5.10.

And all dongles are recognized but only Hardlock one is work HASP HL is not work (the software say not valid or missing dongle).

Try everything the same to my life laptop Assus Intel I5 processor everithing is OK work.

Try to my one my friend Dell insiron with I7 processor and the problem is coming again.

Software are Athena (plug-in for AutoCad).

REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\07635F0C]
"Name"="HASP HL"
"Copyright"="Copyright (C) 2012 coroner"
"Created"="19/08/2012 
"DongleType"=dword:00000001
"SN"=dword:4496EC09
"Type"=dword:000000EA
"Memory"=dword:00000001
"SecTable"=hex:C7,72,B9,38,85,30,B9,38
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,13,07,0C,01,14,30,19,00
"Data"=hex:\
00,00,00,00,00,00,00,00,60,2A,44,64,00,00,00,00,\
00,00,00,00,94,18,A1,4A,00,00,00,00,00,00,00,00,\
00,00,00,00,E0,74,00,4A,00,00,00,00,00,00,00,00,\
00,00,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColumnMask"=dword:000000CB
"CryptInitVect"=dword:0000003F


Please i need solution.

manta2005

Posts : 3
Points : 5
Reputation : 0
Join date : 2014-11-08

Back to top Go down

Re: multikey 18.0.3 HASP HL not work with I7 processors

Post by ovis25 on Sat Nov 08, 2014 2:25 pm

I install Windows 7 SP1 x64

Did u enabled windows drivers test mode?

ovis25

Posts : 428
Points : 722
Reputation : 111
Join date : 2014-06-07
Location : reversing.ro

http://reversing.ro

Back to top Go down

Re: multikey 18.0.3 HASP HL not work with I7 processors

Post by manta2005 on Sat Nov 08, 2014 2:35 pm

Ok for more clearly

1. Install windows (for three days 5 different version)
2. install all drivers for laptop
3. install Autocad
4. install aladin drivers
5. run DSUB13b (as admin)
 - enable test mode
restart
6. install REG file
7. run install.bat (windows is find all dongles)
8. run DSUB13b sign driver multikey.sys (in system32 dir)
restart

everything is OK another software taht work with HARDLOCK is runing.

install Athena try...NOT work

go in system device USB ... everything are ok.

check with chcmkey all dongels are there..

do everithing to any laptop with different processor from I7 works...

i have 3 PC is works. from 2 years.

manta2005

Posts : 3
Points : 5
Reputation : 0
Join date : 2014-11-08

Back to top Go down

Re: multikey 18.0.3 HASP HL not work with I7 processors

Post by jabil on Sun Nov 09, 2014 2:52 am

what is the software you are trying to work??. which version of multikey you are using??
jabil

jabil

Posts : 16
Points : 16
Reputation : -4
Join date : 2011-09-21

Back to top Go down

Re: multikey 18.0.3 HASP HL not work with I7 processors

Post by manta2005 on Sun Nov 09, 2014 3:24 am

Multikey 18.0.3

; Copyright (c) 2004-2008 Chingachguk & Denger2k. All rights reserved
;
; INF file for installing virtual USB multikey 64bit driver

software are CAD-PLAN Athena 2010 c3.02

Driver are "Sentinel HASP Run-time" / SafeNet inc./ version 5.10.1.17163

manta2005

Posts : 3
Points : 5
Reputation : 0
Join date : 2014-11-08

Back to top Go down

Re: multikey 18.0.3 HASP HL not work with I7 processors

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum