Reverse Engineering Team
Unregistered, You must accept the Forum Rules below to be able to use some forum functions.

Read forum rules below...

1. All posts must be written in English.
2. Don't spam/abuse any other member via E-mail or Private Messages.
3. Have phun!

For breaking above rules you may be warned/banned appropriately!

emulate SuperPRO dongle in 64 bit Windows using MultiKey53.724

emulate SuperPRO dongle in 64 bit Windows using MultiKey

Page 1 of 5 1, 2, 3, 4, 5  Next

View previous topic View next topic Go down

emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by fox_coder on Thu Nov 17, 2011 10:43 am

How to emulate SuperPRO dongle in 64 bit Windows using MultiKey ( Windows 7 64bit, Vista 64bit, XP 64bit)

Important!
You also need access to a 32 bit OS.
If you are using Windows 7 64bit or Windows Vista 64bit, you need to disable driver signing with "Driver Signature Enforcement Overrider" tool (included also in Program package download below or you can download it from original site Download Page. Use this Tool to sign the multikey.sys driver file after installing MultiKey x64, the file is located in C:\Windows\System32\Drivers\multikey.sys
If you don't sign the file, windows wont let you install the driver unsigned. Also with this tool you need to activate Test Mode for Windows.


Programs needed:
- SENTEMUL2007 (if you only have a *.dng dump file)
- MultiKeyEmu x64 v. 0.18.0.3 (with x64 devcon.exe)
- Git's tool dmp2mkey v 2.3 (dmp2mkey.exe)
- PVA v 3.3 (sprodmp.exe)

Where to get all the programs at once (the files are clean, sentemul2007 replaced with original EDGE-FIXED release):

Download Rapidshare.com

Download Hotfile.com

Download Megaupload.com

1. Get the *.dmp dump file from your dongle:
a) if you already have a *.dng dump file:
In 32 bit OS emulate your dongle (start "Sentemul2007.exe" --> install driver --> load dump.dng --> start service)

b) if you have a dongle, move to 2.

2. Still in 32 bit OS, use PVA sprodmp.exe without brute WP option to dump the (emulated) dongle data – you should get a *.dmp file.
[You must be registered and logged in to see this image.]

3. Still in 32 bit OS, execute Git's Tool "dmp2mkey.exe" Use to make a *.reg file. Make sure the path is correct, looks like this:

4. Now move to your 64 bit system, there install the .reg file (by doubleclick on it and select “to reg” or right click on it and "Merge"). Then in regedit should look something like this:
[You must be registered and logged in to see this image.]


5. Download and install the latest Sentinel Drivers.
5. Make a new folder, example "C:\MultiKey"

6. Copy the files from MultiKey64 folder (MultiKeyEmu) to the "C:\MultiKey\" folder. (in this attached archive the devcon.exe has already been replaced to match the x64 architecture.)

7. In Multikey folder execute "install.cmd". You should get a message in dos window: " Driver Installed Sucessfully." If you get "devcon failed" error, use another devcon.exe (overwrite the old one in MultiKey folder) that matches your PC architecture (amd64, ia64). And if everithing worked out fine you should now see a notification about a new hardware being installed.
[You must be registered and logged in to see this image.]
All done! Check in the Device Manager under Universal Serial Bus Controllers, there you should see a SafeNet USB SuperPro/UltraPro installed.

fox_coder
Admin
Admin

Posts: 12
Points: 37
Reputation: 2
Join date: 2010-09-11

http://exetools.team-talk.net

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by hbb on Thu Jan 26, 2012 2:50 pm

i did step 2 and 3 on 64bit. is that why not working? i didnt get any error apart from installing Sentemul2007.exe. cant installed. used 2010 version
going to try to install 32bit on vmware

hbb

Posts: 1
Points: 2
Reputation: 1
Join date: 2012-01-26

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by carlosrishmawi on Sat Feb 18, 2012 1:28 am

ok, I did all the steps as instructed and I have the Virtual USB Multikey driver installed correctly in the Device Manager ...
But still the software is not recognizing the virtual key ,,,,and requesting the sentinel hard key to be connected


please advice
Thanks

carlosrishmawi

Posts: 3
Points: 4
Reputation: 1
Join date: 2011-11-15

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by hasp on Sat Feb 18, 2012 8:19 am

show your reg here, also which version mkey are used????

hasp

Posts: 410
Points: 538
Reputation: 124
Join date: 2011-12-16

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by carlosrishmawi on Fri Feb 24, 2012 6:56 am

I'm using windows 64_bit devcon .. and I added the below reg to my regedit that was created by the dmp2mkey.exe ..
and I used the dseo13b to sign my multikey.sys file ....
and everything seems to be working fine ...
everything is configured and installed ...
virtual usb multikey is installed and the safenet USB superPro/UltraPro as well
this means that everything is configured correctly ...
but still the software using this sentinel is not working and asking me for the lock key

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\D9DA0000]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Fri Feb 17 13:40:26.826 2012"
"Name"="D9DA Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,03,03,03,\
03,03,00,00,00,00,00,00,\
00,00,00,00,01,00,00,01,\
00,00,01,00,00,01,00,00,\
01,00,00,00,00,00,00,00,\
00,01,00,00,00,00,00,00,\
00,00,01,00,00,00,00,00,\
01,00,00,00,00,00,00,00
"sntMemory"=hex:\
C3,13,DA,D9,00,00,00,00,00,00,00,00,DE,59,00,00,\
31,FA,A0,F0,00,00,00,00,C6,53,00,00,C6,53,00,00,\
C6,53,00,00,C6,53,00,00,01,00,0C,1F,DB,07,01,00,\
0C,1F,DB,07,01,00,0C,1F,DB,07,01,00,0C,1F,DB,07,\
01,00,0C,1F,DB,07,00,00,00,00,00,00,00,00,00,00,\
00,00,01,00,0C,1F,DB,07,00,00,00,00,00,00,00,00,\
00,00,00,00,01,00,0C,1F,DB,07,00,00,00,00,00,00,\
01,00,0C,1F,DB,07,00,00,00,00,00,00,00,00,00,00


I appreciate any help
thanks ..

carlosrishmawi

Posts: 3
Points: 4
Reputation: 1
Join date: 2011-11-15

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by hasp on Fri Feb 24, 2012 8:54 pm

are you sure are you useing multikey 18.0.3 64bit

hasp

Posts: 410
Points: 538
Reputation: 124
Join date: 2011-12-16

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by nodongle on Sat Feb 25, 2012 7:20 am

This support with Multikey 18.2, i tested Jaws works good

nodongle

Posts: 52
Points: 54
Reputation: 0
Join date: 2011-11-28

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by carlosrishmawi on Mon Feb 27, 2012 9:00 am

well, the good news is that I got this working..... but not for more than one computer ...

so, my hardlock is a single user so the key that was taken from it is also a single user ...so is there a way that I can have it for more than one computer ...


when I start the program on the first computer ...it works fine ...but when I try to start it on another at the same time, it won't work ...

so, is there anything to do about this ...

thanks in advance ..
Carlos

carlosrishmawi

Posts: 3
Points: 4
Reputation: 1
Join date: 2011-11-15

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by stephen67 on Wed Apr 04, 2012 7:56 am

I am having the same issue I think. Any answers for this? Everything works fine in Windows XP land, just windows 7 64x crokes.



Thanks:?:

stephen67

Posts: 6
Points: 6
Reputation: 0
Join date: 2012-03-30

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by nodongle on Wed Apr 04, 2012 10:49 am

Use multikey with multi pcs, possible to use more computers also, because this is virtual device, not physical device, you install all pcs, this support

nodongle

Posts: 52
Points: 54
Reputation: 0
Join date: 2011-11-28

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by stephen67 on Wed Apr 04, 2012 1:38 pm

I'm a little green with the Windows 7 emulator stuff. Can you help as to where and how to do that.

Using Multikey64 version 18.0.3

PVA 3.3

dmp2mkey2591

stephen67

Posts: 6
Points: 6
Reputation: 0
Join date: 2012-03-30

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by hasp on Wed Apr 04, 2012 8:55 pm

stephen67 you need to edit reg file for mkey 18.0.3, cell= 5,7 as 03,03 or post your reg here i will help you.

hasp

Posts: 410
Points: 538
Reputation: 124
Join date: 2011-12-16

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by stephen67 on Wed Apr 04, 2012 9:01 pm

Here it is. I am not sure if I am doing something wrong or what. Thanks for your help

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00004BD6]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Wed Apr 04 08:22:19.518 2012 by dmp2mkey v2.5.9.1"
"Name"="4BD6 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,03,03
"sntMemory"=hex:\
C8,08,D6,4B,00,00,00,00,00,00,00,00,ED,87,00,00,\
65,01,57,00,80,FD,01,01,BF,6F,4E,E2,00,30,44,F0,\
30,48,00,00,82,18,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,01,00,01,00,\
00,00,00,00,00,00,00,00,00,00,00,00,25,16,75,E5

stephen67

Posts: 6
Points: 6
Reputation: 0
Join date: 2012-03-30

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by hasp on Thu Apr 05, 2012 10:42 am

just change the line like below cell= 5,7 as 03,03
"CellType"=hex:\
01,01,03,03,03,03,03,03,\

hasp

Posts: 410
Points: 538
Reputation: 124
Join date: 2011-12-16

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by stephen67 on Thu Apr 05, 2012 11:43 am

Thanks. Did the reg file look ok. I still can't get it to run locally. Not sure what I am doing wrong at this point. I followed the process in the one thread. Any ideas?

stephen67

Posts: 6
Points: 6
Reputation: 0
Join date: 2012-03-30

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by hasp on Thu Apr 05, 2012 11:58 am

Be sure to be logged in as Administrator
1. Disable and turn off UAC
Control Panel-User Accounts and Family Safety-User Accounts-Change Use Account Control Settings-Move Slider to "Never Notify"
REBOOT!!
2. Install your software
3. Run Driver Signature Enforcement Overrider Tool.
[You must be registered and logged in to see this link.]
Select "enable test mode" -> next -> ok
Reboot
4. Import your Reg file to Registry and Install Multikey, run "install.cmd" in the ""MultiKey64-directory" for Windows 7 - 64 Bit.
5. Run Driver Signature Enforcement Overrider Tool
Select "sign a system file" -> next -> :
(c:\windows\system 32\drivers\multikey.sys)
6. REBOOT
IMPORTANT:
On reboot click on F8 ==>
Choose to disable Driver Signing protection.
every startup on F8 Choose to disable Driver Signing protection.

hasp

Posts: 410
Points: 538
Reputation: 124
Join date: 2011-12-16

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by AndromAK on Thu Apr 05, 2012 2:08 pm

Hello.

Do step 2 (PVA sprodmp.exe) and step 3 (dmp2mkey.exe) can be done inside a virtual box hosting a 32bits OS, although the computer is a based 64 bits core (Intel Core i5-2300 CPU) ?

All seems to be ok, after reboot with "SafeNet USB SuperPro/UltraPro" well installed and "driver signing proctection" disabled, but my software still talk about a licence problem. With the dongle, off course, there is no problem, so i made something wrong but i don't know what.

So I think it is about the steps 2 and 3 i made in virtual box.

what do you think?

thanks

AndromAK

Posts: 1
Points: 1
Reputation: 0
Join date: 2012-04-03

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by william22 on Fri Apr 06, 2012 3:12 am

Nice tutorial. Wish I knew this a few years ago.

I found out the hard way.

william22

Posts: 10
Points: 12
Reputation: 0
Join date: 2012-04-06
Age: 36
Location: Europe

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by stephen67 on Fri Apr 06, 2012 9:19 am

I used the Setinal unistaller, which wiped everything out to start from scratch. I delete the entry in the registry. I follow the procedure and used a 32 bit XP machine to do the dump file and the .reg file. then moved over the the win7 x64 machine. installed the reg file from scratch, did the install.cmd, signed the driver, re-booted, did the F8 and my program pops up a box saying no license is available.

Poking around in the program settings, there is an area that it asks license sever options and needs server name and server port. These are set to ponts the sql machine server. Question is and I tried changing the server name to my local machine name, but I am not sure on the port. I left that alone and it does the same thing.

Any ideas?

stephen67

Posts: 6
Points: 6
Reputation: 0
Join date: 2012-03-30

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by stephen67 on Tue Apr 17, 2012 9:32 pm

any ideas??

stephen67

Posts: 6
Points: 6
Reputation: 0
Join date: 2012-03-30

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by wishgranter on Fri May 04, 2012 6:19 am

Hello guys, i get trial of Polyworks 12 - not cracked-hacked a few years, it uses this dongle


im tested the dumper but it does nothing - no dump, no report.... running from C:/ and with UAC disabled. have lic for next 8 days..... can help with it ?

wishgranter

Posts: 9
Points: 11
Reputation: 0
Join date: 2012-05-04

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by wishgranter on Fri May 04, 2012 6:21 am

cannot post link to screengrab of device manager possible is there a Safene Sentinel Dongle...

wishgranter

Posts: 9
Points: 11
Reputation: 0
Join date: 2012-05-04

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by donglet on Wed Jul 11, 2012 12:44 am

Hi everyone,

I have a .dng file and stuck at step 1:

"if you already have a *.dng dump file:
In 32 bit OS emulate your dongle (start "Sentemul2007.exe" --> install driver --> load dump.dng --> start service)"


When i try the above, the "load dump" button is only active after i start the service and afterwards when i load the dump nothing is output from Sentemul2007.

Can anyone please help?

donglet

Posts: 2
Points: 2
Reputation: 0
Join date: 2012-07-11

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by kujmss on Wed Jul 11, 2012 1:56 am

upload your dng file.

kujmss

Posts: 3
Points: 3
Reputation: 0
Join date: 2012-06-21

Back to top Go down

Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey

Post by donglet on Wed Jul 11, 2012 4:15 am

@kujmss i sent you an email with the .dng file.

Thanks for your help.

donglet

Posts: 2
Points: 2
Reputation: 0
Join date: 2012-07-11

Back to top Go down

Page 1 of 5 1, 2, 3, 4, 5  Next

View previous topic View next topic Back to top


Permissions in this forum:
You cannot reply to topics in this forum